Clone of Clone of Clone of 3m pour mada try12 | Online Design Tools for Locally Manufactured Small Wind Turbines

Submitted by tieole on Sat, 25/02/2023 - 16:15

Duration:

00:01:25

Tabs

Results

Blade Rotor Outputs
Property	Value	Variable name
RPM at the cut-in wind speed (TSR)	114.65 RPM	n_cut_in
RPM at the nominal wind speed (TSR)	267.834 RPM	n_nom
Nominal tip speed ratio	8.40998	tsr_nom

Generator Rotor Outputs
Property	Value	Variable name
Rotor disk thickness	10 mm	hr
Magnet width-to-pole pitch ratio	0.188046	ai
Inner-to-outer magnet radius	0.862465	kd
Flux density in airgap	0.490548 T	Bmax
Flux density on magnet surface	0.643378 T	Bmg
First harmonic of flux density in airgap	0.211043 T	Bp
Flux per pole (Calculated)	0.000643538 Wb	Flux_pole
Magnets on a rotor disk	20	magnet_num
Distance between magnets	78.5029 mm	dist_magnet_Rin
Magnet mass	3000 g	MagnetMass
Magnet density	7.5 g/cm3	mag_density
Volume of a single magnet	10000 mm3	Vmag
Volume of all magnets	400000 mm3	VolumeMagnet
Remanent magnetic flux density	1.265 T	Br
Magnetic coercivity	982324 A/m	Hc
Maximum Energy Product	326 KJ/m³	BHmax
Outer diameter	727.364 mm	Dout
Average radius	338.544 mm	Ravg
Inner radius	313.544 mm	Rin
Outer radius	363.682 mm	Rout
Effective outer radius	363.544 mm	Rout_eff
Mass of rotor disks	65.403 kgr	BackIronMass
Volume of rotor disks	8310.42 cm3	BackIronVolume
Maximum flux density in the magnet rotor disk	0.78533 T	SaturMAX
Is the magnet rotor disk saturated?	No	Saturation

Generator Stator Outputs
Property	Value	Variable name
Stator thickness	13 mm	tw
Number of phases	3	nphase
Number of coils per phase	5	q
Total number of coils in stator	15	coil_num
Number of turns per coil	79	Nc
Copper wire diameter	1.5 mm	dc
Number of wires at hand	3	No_wires_at_hand
Winding fill factor	0.58	kf
Copper wire cross-sectional area	5.31 mm2	sc
Copper wire cross-sectional area (Calculated)	5.16566 mm²	sc_theor
Copper wire cross-sectional area of a sinlge wire	1.77 mm²	sc_multi_wires
Copper wire diameter (Calculated)	2.56524 mm	dc_theor
Coil leg width	55.6353 mm	wc
Average length of coil turn	314.695 mm	lavg
Stator nominal temperature	112.725 C°	tc_real
Stator surface area	5252.44 cm²	stator_surface_area
Heat coefficient	0.403371	cq_real
Current density	6.80973 A	Jmax_real
Resistivity of copper at nominal temperature	2.3073E-8 Ohm.m	pt
Resistance of a single coil	0.108025 Ohm	Rc
Phase resistance	0.540127 Ohm	Rphase
Phase inductance	0.00282398 H	Ls
Nagaoka constant	0.118796	Kn
Winding coefficient	0.95	kw
Volume of a single coil	227606 mm3	coil_volume
Weight of a single coil	1210.06 g	coil_weight_constr
Coil hole at Ravg	20 mm	coil_hole_Ravg
Coil hole at Rin	20 mm	coil_hole_Rin_constr
Coil hole at Rout	20 mm	coil_hole_Rout_constr
Coil mass for construction	19.3609 kgr	mcu_constr
EMF at the cut-in wind speed (Calculated)	20.528 V	EMF_cut_in
EMF at the nominal wind speed (Calculated)	47.869 V	EMF_nom
Current at the nominal wind speed	36.1596 A	Iac_nom
Terminal voltage at the nominal wind speed	27.2851 V	V_term_line
Nominal frequency	44.639 Hz	fnom
Generator power (Calculated)	2959.86 W	Pnom
Copper losses (Calculated)	2118.68 W	Pcopper
Eddy current losses (Calculated)	38.2497 W	Peddy
Generator efficiency (Calculated)	0.57044	efficiency_real
AC Power at the rectifier (Calculated)	2663.88 W	Pnom_rect
DC Power at the batteries (Calculated)	2397.49 W	Pnom_dc

Generator Bearing Hub Outputs
Property	Value	Variable name
Number of bolts on hub	6	No_bolts_hub
Mass of bearing hub	14290.7 g	BearingHubMass
Rotational losses (Calculated)	71.9433 W	Prot

Costs, Mass and Volume
Property	Value	Variable name
Total generator cost	975.053 EUR	Totalcost
Total generator mass	92.9888 kgr	TotalMass
Total generator volume	24.5157 dm3	TotalVolume
Blade rotor mass	51.6121 kgr	blade_rotor_mass
Softwood density	500 kgr/m³	softwood_density
Cost of magnets	283.955 EUR	Magcost
Magnet shipping cost	24.1546 EUR	shippingcost
Copper mass	17.7027 kgr	mcu
Cost of copper	348.389 EUR	coppercost
Resin mass	6.88309 kgr	resinmass
Cost of resin	95.0754 EUR	resincost
Resin volume	5061.1 cm3	ResinVolume
Total mass of one generator rotor	34.2015 kgr	TotalMassRotor
Cost of iron	80.4457 EUR	ironcost
Surface area of moulds	1.05548 m2	woodS
Total cost of moulds	167.187 EUR	woodcost

Output files

Octave/Matlab variable file:

simulation-8132.mat

Input parameters

Blade Rotor Inputs

Turbine radius:

3.00m

Aerodynamic coefficient:

0.30

Cut-in wind speed:

4.00m/s

Nominal wind speed:

10.00m/s

Cut-in TSR:

9.00

Design TSR:

6.00

Air density:

1.225kg/m³

Generator Rotor Inputs

AFPM rotor topology:

Double Rotor

Magnetic material:

NdFeB N40

Number of generator poles:

Magnet length:

50mm

Magnet width:

20mm

Magnet thickness:

10mm

Rotor disk thickness:

User Defined

Rotor disk thickness:

10mm

Mechanical clearance:

3.00mm

Generator Stator Inputs

Select coil type:

Rectangular

Winding fill factor:

User defined

Winding fill factor:

0.58

Stator thickness:

User defined

Stator thickness:

13mm

Current density:

7.00A/mm2

System Inputs

System voltage:

48.00V

Nominal voltage:

58.00V

Transmission cable losses:

10.00%

Rectifier losses:

10.00%

Financial

Copper price:

16.00€/kg

Iron price:

1.00€/kg

Resin price:

11.23€/kg

Plywood price:

17.60 €/m²

Simulation Inputs

Also run UserAFPM:

false

Constants

Copper resistivity:

1.678E-8 Ω·m

Copper density:

8.94g/cm³

Iron density:

7.87g/cm³

Resin density:

1.36g/cm³