Clone of pma | Online Design Tools for Locally Manufactured Small Wind Turbines

Submitted by AHMEDNA8 on Sat, 30/05/2020 - 21:43

Duration:

00:00:02

Tabs

Results

Blade Rotor Outputs
Property	Value	Variable name
RPM at the cut-in wind speed (TSR)	208.997 RPM	n_cut_in
RPM at the nominal wind speed (TSR)	281.974 RPM	n_nom
Nominal tip speed ratio	5.05941	tsr_nom

Generator Rotor Outputs
Property	Value	Variable name
Rotor disk thickness	10 mm	hr
Magnet width-to-pole pitch ratio	1.01683	ai
Inner-to-outer magnet radius	0.531235	kd
Flux density in airgap	0.54 T	Bmax
Flux density on magnet surface	0.62 T	Bmg
First harmonic of flux density in airgap	0.4 T	Bp
Flux per pole (Calculated)	0.0008556 Wb	Flux_pole
Magnets on a rotor disk	16	magnet_num
Distance between magnets	-9.5286 mm	dist_magnet_Rin
Magnet mass	3312 g	MagnetMass
Magnet density	7.5 g/cm3	mag_density
Volume of a single magnet	13800 mm3	Vmag
Volume of all magnets	441600 mm3	VolumeMagnet
Remanent magnetic flux density	1.45 T	Br
Magnetic coercivity	1120020 A/m	Hc
Maximum Energy Product	422 KJ/m³	BHmax
Outer diameter	198.54 mm	Dout
Average radius	75.1301 mm	Ravg
Inner radius	52.1301 mm	Rin
Outer radius	99.2699 mm	Rout
Effective outer radius	98.1301 mm	Rout_eff
Mass of rotor disks	4.87293 kgr	BackIronMass
Volume of rotor disks	619.178 cm3	BackIronVolume

Generator Stator Outputs
Property	Value	Variable name
Stator thickness	13 mm	tw
Number of phases	3	nphase
Number of coils per phase	4	q
Total number of coils in stator	12	coil_num
Number of turns per coil	13	Nc
Copper wire diameter	1.7 mm	dc
Number of wires at hand	1	No_wires_at_hand
Winding fill factor	0.52	kf
Copper wire cross-sectional area	2.27 mm2	sc
Copper wire cross-sectional area (Calculated)	2.24363 mm²	sc_theor
Copper wire cross-sectional area of a sinlge wire	2.27 mm²	sc_multi_wires
Copper wire diameter (Calculated)	1.6906 mm	dc_theor
Coil leg width	4.40904 mm	wc
Average length of coil turn	154.299 mm	lavg
Stator nominal temperature	69.7566 C°	tc_real
Stator surface area	163.274 cm²	stator_surface_area
Heat coefficient	0.246189	cq_real
Current density	5.9303 A	Jmax_real
Resistivity of copper at nominal temperature	2.09179E-8 Ohm.m	pt
Resistance of a single coil	0.0184841 Ohm	Rc
Phase resistance	0.0739365 Ohm	Rphase
Phase inductance	4.06913E-5 H	Ls
Nagaoka constant	0.32868	Kn
Winding coefficient	0.95	kw
Volume of a single coil	8844.03 mm3	coil_volume
Weight of a single coil	46.9697 g	coil_weight_constr
Coil hole at Ravg	30 mm	coil_hole_Ravg
Coil hole at Rin	17.8882 mm	coil_hole_Rin_constr
Coil hole at Rout	41.7414 mm	coil_hole_Rout_constr
Coil mass for construction	0.610606 kgr	mcu_constr
EMF at the cut-in wind speed (Calculated)	5.132 V	EMF_cut_in
EMF at the nominal wind speed (Calculated)	7.0565 V	EMF_nom
Current at the nominal wind speed	13.4618 A	Iac_nom
Terminal voltage at the nominal wind speed	5.6452 V	V_term_line
Nominal frequency	37.5965 Hz	fnom
Generator power (Calculated)	227.984 W	Pnom
Copper losses (Calculated)	40.1963 W	Pcopper
Eddy current losses (Calculated)	2.45641 W	Peddy
Generator efficiency (Calculated)	0.816541	efficiency_real
AC Power at the rectifier (Calculated)	205.185 W	Pnom_rect
DC Power at the batteries (Calculated)	184.667 W	Pnom_dc

Generator Bearing Hub Outputs
Property	Value	Variable name
Number of bolts on hub	4	No_bolts_hub
Mass of bearing hub	3708.65 g	BearingHubMass
Rotational losses (Calculated)	8.57016 W	Prot

Costs, Mass and Volume
Property	Value	Variable name
Total generator cost	445.982 EUR	Totalcost
Total generator mass	9.61287 kgr	TotalMass
Total generator volume	1.70274 dm3	TotalVolume
Blade rotor mass	3.30317 kgr	blade_rotor_mass
Softwood density	500 kgr/m³	softwood_density
Cost of magnets	380.432 EUR	Magcost
Magnet shipping cost	26.6667 EUR	shippingcost
Copper mass	0.488485 kgr	mcu
Cost of copper	7.21003 EUR	coppercost
Resin mass	0.939461 kgr	resinmass
Cost of resin	12.9767 EUR	resincost
Resin volume	690.78 cm3	ResinVolume
Total mass of one generator rotor	4.09246 kgr	TotalMassRotor
Cost of iron	5.9937 EUR	ironcost
Surface area of moulds	0.248542 m2	woodS
Total cost of moulds	39.369 EUR	woodcost

Output files

Octave/Matlab variable file:

simulation-6401.mat

Input parameters

Blade Rotor Inputs

Turbine radius:

1.20m

Aerodynamic coefficient:

0.30

Cut-in wind speed:

3.00m/s

Nominal wind speed:

7.00m/s

Cut-in TSR:

8.75

Design TSR:

7.00

Air density:

1.225kg/m³

Generator Rotor Inputs

AFPM rotor topology:

Double Rotor

Magnetic material:

NdFeB N52

Number of generator poles:

Magnet length:

46mm

Magnet width:

30mm

Magnet thickness:

10mm

Rotor disk thickness:

Calculated

Mechanical clearance:

1.00mm

Generator Stator Inputs

Select coil type:

Keyhole

Winding fill factor:

Calculated

Stator thickness:

Calculated

Current density:

6.00A/mm2

System Inputs

System voltage:

12.00V

Nominal voltage:

12.00V

Transmission cable losses:

10.00%

Rectifier losses:

10.00%

Financial

Copper price:

12.00€/kg

Iron price:

1.00€/kg

Resin price:

11.23€/kg

Plywood price:

17.60 €/m²

Simulation Inputs

Also run UserAFPM:

false

Constants

Copper resistivity:

1.678E-8 Ω·m

Copper density:

8.94g/cm³

Iron density:

7.87g/cm³

Resin density:

1.36g/cm³