Propel-E 100 - 60x40x18 - 12p - 18mm stator - 110V - 6A | Online Design Tools for Locally Manufactured Small Wind Turbines

Submitted by fromwastetowind on Thu, 27/02/2025 - 15:09

Duration:

00:00:38

Tabs

Results

Blade Rotor Outputs
Property	Value	Variable name
RPM at the cut-in wind speed (TSR)	159.236 RPM	n_cut_in
RPM at the nominal wind speed (TSR)	335.972 RPM	n_nom
Nominal tip speed ratio	3.5165	tsr_nom

Generator Rotor Outputs
Property	Value	Variable name
Rotor disk thickness	10 mm	hr
Magnet width-to-pole pitch ratio	0.643336	ai
Inner-to-outer magnet radius	0.596631	kd
Flux density in airgap	0.181924 T	Bmax
Flux density on magnet surface	0.199472 T	Bmg
First harmonic of flux density in airgap	0.175633 T	Bp
Flux per pole (Calculated)	0.000487142 Wb	Flux_pole
Magnets on a rotor disk	12	magnet_num
Distance between magnets	6.468 mm	dist_magnet_Rin
Magnet mass	5184 g	MagnetMass
Magnet density	5 g/cm3	mag_density
Volume of a single magnet	43200 mm3	Vmag
Volume of all magnets	1036800 mm3	VolumeMagnet
Remanent magnetic flux density	0.39 T	Br
Magnetic coercivity	227950 A/m	Hc
Maximum Energy Product	30 KJ/m³	BHmax
Outer diameter	300.172 mm	Dout
Average radius	118.747 mm	Ravg
Inner radius	88.7473 mm	Rin
Outer radius	150.086 mm	Rout
Effective outer radius	148.747 mm	Rout_eff
Mass of rotor disks	11.1387 kgr	BackIronMass
Volume of rotor disks	1415.34 cm3	BackIronVolume
Maximum flux density in the magnet rotor disk	0.516772 T	SaturMAX
Is the magnet rotor disk saturated?	No	Saturation

Generator Stator Outputs
Property	Value	Variable name
Stator thickness	18 mm	tw
Number of phases	3	nphase
Number of coils per phase	3	q
Total number of coils in stator	9	coil_num
Number of turns per coil	370	Nc
Copper wire diameter	0.71 mm	dc
Number of wires at hand	1	No_wires_at_hand
Winding fill factor	0.75	kf
Copper wire cross-sectional area	0.4 mm2	sc
Copper wire cross-sectional area (Calculated)	0.283195 mm²	sc_theor
Copper wire cross-sectional area of a sinlge wire	0.4 mm²	sc_multi_wires
Copper wire diameter (Calculated)	0.600631 mm	dc_theor
Coil leg width	10.963 mm	wc
Average length of coil turn	234.424 mm	lavg
Stator nominal temperature	68.699 C°	tc_real
Stator surface area	462.596 cm²	stator_surface_area
Heat coefficient	0.241734	cq_real
Current density	4.24792 A	Jmax_real
Resistivity of copper at nominal temperature	1.98464E-8 Ohm.m	pt
Resistance of a single coil	4.30354 Ohm	Rc
Phase resistance	12.9106 Ohm	Rphase
Phase inductance	0.0361232 H	Ls
Nagaoka constant	0.288092	Kn
Winding coefficient	0.95	kw
Volume of a single coil	46259.6 mm3	coil_volume
Weight of a single coil	311.847 g	coil_weight_constr
Coil hole at Ravg	40 mm	coil_hole_Ravg
Coil hole at Rin	40 mm	coil_hole_Rin_constr
Coil hole at Rout	40 mm	coil_hole_Rout_constr
Coil mass for construction	3.11847 kgr	mcu_constr
EMF at the cut-in wind speed (Calculated)	36.3517 V	EMF_cut_in
EMF at the nominal wind speed (Calculated)	76.6389 V	EMF_nom
Current at the nominal wind speed	1.69917 A	Iac_nom
Terminal voltage at the nominal wind speed	51.7477 V	V_term_line
Nominal frequency	33.5972 Hz	fnom
Generator power (Calculated)	263.784 W	Pnom
Copper losses (Calculated)	111.825 W	Pcopper
Eddy current losses (Calculated)	0.176815 W	Peddy
Generator efficiency (Calculated)	0.676053	efficiency_real
AC Power at the rectifier (Calculated)	237.406 W	Pnom_rect
DC Power at the batteries (Calculated)	213.665 W	Pnom_dc

Generator Bearing Hub Outputs
Property	Value	Variable name
Number of bolts on hub	4	No_bolts_hub
Mass of bearing hub	3708.65 g	BearingHubMass
Rotational losses (Calculated)	14.3963 W	Prot

Costs, Mass and Volume
Property	Value	Variable name
Total generator cost	233.203 EUR	Totalcost
Total generator mass	21.8952 kgr	TotalMass
Total generator volume	5.66134 dm3	TotalVolume
Blade rotor mass	1.39353 kgr	blade_rotor_mass
Softwood density	500 kgr/m³	softwood_density
Cost of magnets	82.8287 EUR	Magcost
Magnet shipping cost	62.6087 EUR	shippingcost
Copper mass	2.79154 kgr	mcu
Cost of copper	41.2031 EUR	coppercost
Resin mass	2.78101 kgr	resinmass
Cost of resin	38.4138 EUR	resincost
Resin volume	2044.86 cm3	ResinVolume
Total mass of one generator rotor	8.16135 kgr	TotalMassRotor
Cost of iron	13.7006 EUR	ironcost
Surface area of moulds	0.360206 m2	woodS
Total cost of moulds	57.0567 EUR	woodcost

Output files

Octave/Matlab variable file:

simulation-9690.mat

Input parameters

Blade Rotor Inputs

Turbine radius:

0.90m

Aerodynamic coefficient:

0.35

Cut-in wind speed:

3.00m/s

Nominal wind speed:

9.00m/s

Cut-in TSR:

5.00

Design TSR:

6.00

Air density:

1.204kg/m³

Generator Rotor Inputs

AFPM rotor topology:

Double Rotor

Magnetic material:

Ferrite C8

Number of generator poles:

Magnet length:

60mm

Magnet width:

40mm

Magnet thickness:

18mm

Rotor disk thickness:

User Defined

Rotor disk thickness:

10mm

Mechanical clearance:

3.00mm

Generator Stator Inputs

Select coil type:

Rectangular

Winding fill factor:

User defined

Winding fill factor:

0.75

Stator thickness:

User defined

Stator thickness:

18mm

Current density:

6.00A/mm2

System Inputs

System voltage:

85.00V

Nominal voltage:

110.00V

Transmission cable losses:

10.00%

Rectifier losses:

10.00%

Financial

Copper price:

12.00€/kg

Iron price:

1.00€/kg

Resin price:

11.23€/kg

Plywood price:

17.60 €/m²

Simulation Inputs

Also run UserAFPM:

false

Constants

Copper resistivity:

1.678E-8 Ω·m

Copper density:

8.94g/cm³

Iron density:

7.87g/cm³

Resin density:

1.36g/cm³