Clone of Clone of Clone of Clone of Clone of Clone of Clone of Clone of Clone of Clone of Clone of Clone of Clone of Clone of Clone of Clone of Clone of Clone of Clone of kierroskone | Online Design Tools for Locally Manufactured Small Wind Turbines

Submitted by Juntunenn on Sun, 29/11/2020 - 18:05

Duration:

00:00:01

Tabs

Results

Blade Rotor Outputs
Property	Value	Variable name
RPM at the cut-in wind speed (TSR)	282.281 RPM	n_cut_in
RPM at the nominal wind speed (TSR)	509.101 RPM	n_nom
Nominal tip speed ratio	5.32859	tsr_nom

Generator Rotor Outputs
Property	Value	Variable name
Rotor disk thickness	12 mm	hr
Magnet width-to-pole pitch ratio	0.911535	ai
Inner-to-outer magnet radius	0.835722	kd
Flux density in airgap	0.157 T	Bmax
Flux density on magnet surface	0.237 T	Bmg
First harmonic of flux density in airgap	0.1 T	Bp
Flux per pole (Calculated)	0.0001896 Wb	Flux_pole
Magnets on a rotor disk	64	magnet_num
Distance between magnets	-0.0225 mm	dist_magnet_Rin
Magnet mass	5120 g	MagnetMass
Magnet density	5 g/cm3	mag_density
Volume of a single magnet	8000 mm3	Vmag
Volume of all magnets	1024000 mm3	VolumeMagnet
Remanent magnetic flux density	0.39 T	Br
Magnetic coercivity	227950 A/m	Hc
Maximum Energy Product	30 KJ/m³	BHmax
Outer diameter	487.389 mm	Dout
Average radius	223.489 mm	Ravg
Inner radius	203.489 mm	Rin
Outer radius	243.695 mm	Rout
Effective outer radius	243.489 mm	Rout_eff
Mass of rotor disks	35.2393 kgr	BackIronMass
Volume of rotor disks	4477.68 cm3	BackIronVolume

Generator Stator Outputs
Property	Value	Variable name
Stator thickness	9 mm	tw
Number of phases	3	nphase
Number of coils per phase	16	q
Total number of coils in stator	48	coil_num
Number of turns per coil	11	Nc
Copper wire diameter	1.5 mm	dc
Number of wires at hand	1	No_wires_at_hand
Winding fill factor	0.5	kf
Copper wire cross-sectional area	1.77 mm2	sc
Copper wire cross-sectional area (Calculated)	1.59293 mm²	sc_theor
Copper wire cross-sectional area of a sinlge wire	1.77 mm²	sc_multi_wires
Copper wire diameter (Calculated)	1.42451 mm	dc_theor
Coil leg width	4.36993 mm	wc
Average length of coil turn	122.527 mm	lavg
Stator nominal temperature	38.6786 C°	tc_real
Stator surface area	514.019 cm²	stator_surface_area
Heat coefficient	0.0943559	cq_real
Current density	4.49981 A	Jmax_real
Resistivity of copper at nominal temperature	2.09179E-8 Ohm.m	pt
Resistance of a single coil	0.0159284 Ohm	Rc
Phase resistance	0.254854 Ohm	Rphase
Phase inductance	9.41627E-5 H	Ls
Nagaoka constant	0.291575	Kn
Winding coefficient	0.95	kw
Volume of a single coil	4818.93 mm3	coil_volume
Weight of a single coil	25.205 g	coil_weight_constr
Coil hole at Ravg	20 mm	coil_hole_Ravg
Coil hole at Rin	17.3915 mm	coil_hole_Rin_constr
Coil hole at Rout	22.6247 mm	coil_hole_Rout_constr
Coil mass for construction	1.23505 kgr	mcu_constr
EMF at the cut-in wind speed (Calculated)	20.528 V	EMF_cut_in
EMF at the nominal wind speed (Calculated)	38.2227 V	EMF_nom
Current at the nominal wind speed	7.96467 A	Iac_nom
Terminal voltage at the nominal wind speed	30.5782 V	V_term_line
Nominal frequency	271.52 Hz	fnom
Generator power (Calculated)	730.636 W	Pnom
Copper losses (Calculated)	48.5007 W	Pcopper
Eddy current losses (Calculated)	11.8794 W	Peddy
Generator efficiency (Calculated)	0.871385	efficiency_real
AC Power at the rectifier (Calculated)	657.572 W	Pnom_rect
DC Power at the batteries (Calculated)	591.815 W	Pnom_dc

Generator Bearing Hub Outputs
Property	Value	Variable name
Number of bolts on hub	4	No_bolts_hub
Mass of bearing hub	3708.65 g	BearingHubMass
Rotational losses (Calculated)	47.4607 W	Prot

Costs, Mass and Volume
Property	Value	Variable name
Total generator cost	301.948 EUR	Totalcost
Total generator mass	42.8794 kgr	TotalMass
Total generator volume	11.0076 dm3	TotalVolume
Blade rotor mass	2.54428 kgr	blade_rotor_mass
Softwood density	500 kgr/m³	softwood_density
Cost of magnets	124.62 EUR	Magcost
Magnet shipping cost	61.8357 EUR	shippingcost
Copper mass	1.02371 kgr	mcu
Cost of copper	15.11 EUR	coppercost
Resin mass	1.49631 kgr	resinmass
Cost of resin	20.6684 EUR	resincost
Resin volume	1100.23 cm3	ResinVolume
Total mass of one generator rotor	20.1797 kgr	TotalMassRotor
Cost of iron	43.3444 EUR	ironcost
Surface area of moulds	0.619982 m2	woodS
Total cost of moulds	98.2051 EUR	woodcost

Output files

Octave/Matlab variable file:

simulation-6836.mat

Input parameters

Blade Rotor Inputs

Turbine radius:

1.10m

Aerodynamic coefficient:

0.30

Cut-in wind speed:

5.00m/s

Nominal wind speed:

11.00m/s

Cut-in TSR:

6.50

Design TSR:

4.10

Air density:

1.204kg/m³

Generator Rotor Inputs

AFPM rotor topology:

Double Rotor

Magnetic material:

Ferrite C8

Number of generator poles:

Magnet length:

40mm

Magnet width:

20mm

Magnet thickness:

10mm

Rotor disk thickness:

User Defined

Rotor disk thickness:

12mm

Mechanical clearance:

3.00mm

Generator Stator Inputs

Select coil type:

Keyhole

Winding fill factor:

User defined

Winding fill factor:

0.50

Stator thickness:

User defined

Stator thickness:

9mm

Current density:

5.00A/mm2

System Inputs

System voltage:

48.00V

Nominal voltage:

65.00V

Transmission cable losses:

10.00%

Rectifier losses:

10.00%

Financial

Copper price:

12.00€/kg

Iron price:

1.00€/kg

Resin price:

11.23€/kg

Plywood price:

17.60 €/m²

Simulation Inputs

Also run UserAFPM:

false

Constants

Copper resistivity:

1.678E-8 Ω·m

Copper density:

8.94g/cm³

Iron density:

7.87g/cm³

Resin density:

1.36g/cm³