Clone of Clone of Clone of pma | Online Design Tools for Locally Manufactured Small Wind Turbines

Submitted by AHMEDNA8 on Sat, 30/05/2020 - 21:47

Duration:

00:00:29

Tabs

Results

Blade Rotor Outputs
Property	Value	Variable name
RPM at the cut-in wind speed (TSR)	208.997 RPM	n_cut_in
RPM at the nominal wind speed (TSR)	298.733 RPM	n_nom
Nominal tip speed ratio	4.69011	tsr_nom

Generator Rotor Outputs
Property	Value	Variable name
Rotor disk thickness	10 mm	hr
Magnet width-to-pole pitch ratio	0.595452	ai
Inner-to-outer magnet radius	0.641707	kd
Flux density in airgap	0.586034 T	Bmax
Flux density on magnet surface	0.722307 T	Bmg
First harmonic of flux density in airgap	0.543846 T	Bp
Flux per pole (Calculated)	0.000642042 Wb	Flux_pole
Magnets on a rotor disk	12	magnet_num
Distance between magnets	7.8219 mm	dist_magnet_Rin
Magnet mass	1575 g	MagnetMass
Magnet density	7.5 g/cm3	mag_density
Volume of a single magnet	8750 mm3	Vmag
Volume of all magnets	210000 mm3	VolumeMagnet
Remanent magnetic flux density	1.45 T	Br
Magnetic coercivity	1120020 A/m	Hc
Maximum Energy Product	422 KJ/m³	BHmax
Outer diameter	196.964 mm	Dout
Average radius	80.1853 mm	Ravg
Inner radius	62.6853 mm	Rin
Outer radius	98.4818 mm	Rout
Effective outer radius	97.6853 mm	Rout_eff
Mass of rotor disks	4.79586 kgr	BackIronMass
Volume of rotor disks	609.385 cm3	BackIronVolume
Maximum flux density in the magnet rotor disk	1.10082 T	SaturMAX
Is the magnet rotor disk saturated?	No	Saturation

Generator Stator Outputs
Property	Value	Variable name
Stator thickness	16 mm	tw
Number of phases	3	nphase
Number of coils per phase	3	q
Total number of coils in stator	9	coil_num
Number of turns per coil	30	Nc
Copper wire diameter	1.6 mm	dc
Number of wires at hand	2	No_wires_at_hand
Winding fill factor	0.5	kf
Copper wire cross-sectional area	4.02 mm2	sc
Copper wire cross-sectional area (Calculated)	3.8944 mm²	sc_theor
Copper wire cross-sectional area of a sinlge wire	2.01 mm²	sc_multi_wires
Copper wire diameter (Calculated)	2.22734 mm	dc_theor
Coil leg width	15.2257 mm	wc
Average length of coil turn	155.702 mm	lavg
Stator nominal temperature	54.3317 C°	tc_real
Stator surface area	426.723 cm²	stator_surface_area
Heat coefficient	0.177038	cq_real
Current density	4.84378 A	Jmax_real
Resistivity of copper at nominal temperature	1.90527E-8 Ohm.m	pt
Resistance of a single coil	0.0221385 Ohm	Rc
Phase resistance	0.0664154 Ohm	Rphase
Phase inductance	0.000120684 H	Ls
Nagaoka constant	0.294995	Kn
Winding coefficient	0.95	kw
Volume of a single coil	37930.9 mm3	coil_volume
Weight of a single coil	179.064 g	coil_weight_constr
Coil hole at Ravg	25 mm	coil_hole_Ravg
Coil hole at Rin	12.7888 mm	coil_hole_Rin_constr
Coil hole at Rout	37.0205 mm	coil_hole_Rout_constr
Coil mass for construction	1.79064 kgr	mcu_constr
EMF at the cut-in wind speed (Calculated)	5.132 V	EMF_cut_in
EMF at the nominal wind speed (Calculated)	7.28211 V	EMF_nom
Current at the nominal wind speed	19.472 A	Iac_nom
Terminal voltage at the nominal wind speed	5.6452 V	V_term_line
Nominal frequency	29.8733 Hz	fnom
Generator power (Calculated)	329.77 W	Pnom
Copper losses (Calculated)	75.546 W	Pcopper
Eddy current losses (Calculated)	12.488 W	Peddy
Generator efficiency (Calculated)	0.774472	efficiency_real
AC Power at the rectifier (Calculated)	296.793 W	Pnom_rect
DC Power at the batteries (Calculated)	267.114 W	Pnom_dc

Generator Bearing Hub Outputs
Property	Value	Variable name
Number of bolts on hub	4	No_bolts_hub
Mass of bearing hub	3708.65 g	BearingHubMass
Rotational losses (Calculated)	7.9957 W	Prot

Costs, Mass and Volume
Property	Value	Variable name
Total generator cost	267.465 EUR	Totalcost
Total generator mass	9.23901 kgr	TotalMass
Total generator volume	1.82816 dm3	TotalVolume
Blade rotor mass	3.30317 kgr	blade_rotor_mass
Softwood density	500 kgr/m³	softwood_density
Cost of magnets	181.397 EUR	Magcost
Magnet shipping cost	12.6812 EUR	shippingcost
Copper mass	1.51085 kgr	mcu
Cost of copper	22.3002 EUR	coppercost
Resin mass	1.35729 kgr	resinmass
Cost of resin	18.7481 EUR	resincost
Resin volume	998.008 cm3	ResinVolume
Total mass of one generator rotor	3.18543 kgr	TotalMassRotor
Cost of iron	5.89891 EUR	ironcost
Surface area of moulds	0.246973 m2	woodS
Total cost of moulds	39.1205 EUR	woodcost

Output files

Octave/Matlab variable file:

simulation-6404.mat

Input parameters

Blade Rotor Inputs

Turbine radius:

1.20m

Aerodynamic coefficient:

0.30

Cut-in wind speed:

3.00m/s

Nominal wind speed:

8.00m/s

Cut-in TSR:

8.75

Design TSR:

7.00

Air density:

1.225kg/m³

Generator Rotor Inputs

AFPM rotor topology:

Double Rotor

Magnetic material:

NdFeB N52

Number of generator poles:

Magnet length:

35mm

Magnet width:

25mm

Magnet thickness:

10mm

Rotor disk thickness:

Calculated

Mechanical clearance:

2.00mm

Generator Stator Inputs

Select coil type:

Keyhole

Winding fill factor:

Calculated

Stator thickness:

Calculated

Current density:

5.00A/mm2

System Inputs

System voltage:

12.00V

Nominal voltage:

12.00V

Transmission cable losses:

10.00%

Rectifier losses:

10.00%

Financial

Copper price:

12.00€/kg

Iron price:

1.00€/kg

Resin price:

11.23€/kg

Plywood price:

17.60 €/m²

Simulation Inputs

Also run UserAFPM:

false

Constants

Copper resistivity:

1.678E-8 Ω·m

Copper density:

8.94g/cm³

Iron density:

7.87g/cm³

Resin density:

1.36g/cm³