OP | Online Design Tools for Locally Manufactured Small Wind Turbines

Duration:

00:59:54

Tabs

Input parameters

Blade Rotor Inputs

Turbine radius:

1.20m

Aerodynamic coefficient:

0.30

Cut-in wind speed:

3.00m/s

Nominal wind speed:

10.00m/s

Cut-in TSR:

8.75

Design TSR:

7.00

Air density:

1.204kg/m³

Generator Rotor Inputs

AFPM rotor topology:

Double Rotor

Magnetic material:

NdFeB N40

Number of generator poles:

12

Rotor disk thickness:

10mm

Mechanical clearance:

3.00mm

Generator Stator Inputs

Select coil type:

Rectangular

Stator thickness:

13mm

Current density:

6.00A/mm2

System Inputs

System voltage:

24.00V

Nominal voltage:

24.00V

Transmission cable losses:

10.00%

Rectifier losses:

10.00%

Financial

Copper price:

12.00€/kg

Iron price:

1.00€/kg

Resin price:

11.23€/kg

Plywood price:

17.60 €/m²

Constants

Copper resistivity:

1.678E-8 Ω·m

Copper density:

8.94g/cm³

Iron density:

7.87g/cm³

Resin density:

1.36g/cm³

Optimization setup

Weight for Efficiency:

4.00

Weight for Cost:

2.00

Weight for Mass:

1.00

Number of design variables:

4

Number of particle generations:

20

Times to repeat optimization:

1

Optimization setup #2

Max value of magnet length:

70.00mm

Min value of magnet length:

50.00mm

Max value of magnet width:

40.00mm

Min value of magnet width:

20.00mm

Max value of magnet thickness:

15.00mm

Min value of magnet thickness:

8.00mm

Max value of stator thickness:

18.00mm

Min value of stator thickness:

10.00mm